Zip ZIP116, Instruction Manual

Page: 207 / 413

© 2023 System Q Ltd
201
Index
ZipNVR.com
Enabling CC
To enable or disable CC for each camera just tick or untick the Switch check box.
Sensitivity
By setting the Sensitivity you can avoid false triggers or capture slight movements.
1 is the lowest sensitivity level and will only trigger when there is a large amount of
movement where something clearly crosses over the line. Setting a low sensitivity
level can prevent false triggers for something like a tree or bush moving in the wind.
4 is the highest sensitivity level and will trigger with the slightest movement over the
line. High sensitivity levels are more suited to internal cameras away from
environmental conditions.
Scene
You should set the Scene to match where the camera has been installed. Setting the
Scene correctly allows the recorder to make allowances for typical light levels and
produce more accurate results. You can choose between
Indoor or Outdoor from
the Scene drop down list to best suit the camera's installation.
Alarm Handling
Clicking the Alarm button will open the Alarm Handling screen where you can set
what actions the recorder will take when a line is crossed. For more information on
setting up alarm handling see the
Alarm Menu - Smart section.
Saving Changes
When you are happy with the current settings click the Apply button to save your
changes. If you exit the window without saving any changes will be lost.
9.7.6.1 Video Menu - Smart - CC - Setup
When you click a camera's Setup icon in the CC sub-menu the CC Setup screen
will be displayed.
In the CC setup screen you can create up a line crossing which allows you to monitor
or retrospectively analyse movement across this imaginary barrier.
243
200