5
Installation instructions
802742UK V4.00 Sept 2018 - Zip HydroTap Industrial
Technical support
Tel: 0345 6 005 005 Email: [email protected] www.zipwater.co.uk
General product features
Command Centre
Thank you for purchasing a Zip HydroTap
G4. Please read and follow these instructions carefully to ensure
safe and trouble free operation. If help and advice is required, please call 0345 6 005 005.
What is the Zip HydroTap
G4 ?
This Zip HydroTap G4 is an electronically controlled, filtered, boiling and chilled water drinking system for
the industrial environment. The HydroTap G4 systems are under counter drinking water appliances with
a dispensing tap mounted on a sink or worktop, which has been designed for industrial applications. The
HydroTap G4 utilises a conventional refrigerant compressor to chill the water and an immersion heating
element to boil the water. The boiling and chilled models will dispense boiling water (factory set to 98°C)
chilled water (factory set to 5-9°C). These units are NOT designed to be used as sanitary fixtures.
The Zip HydroTap G4 models which dispense boiling water are fitted with a tap mounted safety lock. In
addition, there are various energy saving options accessible via the main menu. The system is equipped with
a self-calibrating program which caters for altitude adjustment. The water filter is a disposable item which will
require periodic replacement and is covered by a limited OEM warranty.
It is important that the installation be undertaken safely, correctly and completely in order to utilise all the
benefits that the HydroTap G4 can provide.
Legacy mode
The Industrial series of taps require the G4 Command-Centre to be set in legacy mode prior to initial
operation. (See section 6 for details).
Legacy mode is enabled / disabled in the service section of the main menu. Please note this is password
protected. Please call 0345 6 005 005 for details.
