Zip GP-SUPA004 Instruction Manual Download Page 297

Page: 297 / 381

291

Index

Storage Menu

In the Storage Menu you can manage your hard drives, run hard drive diagnostic
checks and manage your cloud storage account.

From the Storage menu you can access the following sub-menus and features.

Disk

In the

Disk sub-menu

you can manage the hard drives inside the recorder.

S.M.A.R.T

The

S.M.A.R.T sub-menu

(Self-Monitoring, Analysis, and Reporting Technology)

allows you to run detailed diagnostic checks on the recorder's hard drives.

Cloud

The

Cloud sub-menu

allows you to link the recorder to a cloud storage account for

saving your videos and snapshots online.

292

294

296

Summary of Contents for GP-SUPA004






























































































































































































































































































































































































Search results

Summary of Contents for GP-SUPA004

Reviews:

Related manuals for GP-SUPA004

Brands by name

Popular brands

Zip GP-SUPA004, Instruction Manual

Search results

Summary of Contents for GP-SUPA004

Reviews:

Related manuals for GP-SUPA004

Brands by name

Popular brands