NANO
User Manual - English
It is important that the “NANO” oven
is
installed and used only
in accordance with the attached user manual, for your
security and to ensure that the oven will function properly.
We recommend you
read carefully the following
instructions before using the oven.
The safety instructions, by themselves, do not eliminate
danger completely, and proper accident prevention
measures must always be used.
SAFE POSITIONING OF YOUR NANO OVEN
The NANO oven
is designed to
be used
only
o
utside.
It is recommended whe
re
there is no wind,
even better in a
good
sheltered spot. The NANO oven is made of weather resistant
materials, but it is recommended to cover it
after use ,
when its fully coole
d
.
For longer periods, store in a
cool
dry place over winter.
•
Position the oven
on a proper stable
surface
, ensur
ing
that
the base
can
support the
ovens
weight.
•
Do not place the NANO oven on flammable/Combustible surfaces
ASSEMBLING THE FRONT STAINLESS STEEL SHELF
The NANO oven is equipped with a stainless steel front shelf to improve the management of pizza
cooking and allow
ing the pizza
to be turned even outside the oven. The front shelf is very easy to
assemble / disassemble, there is a
small
slot of a few millimeters on the front that allows the shelf
to be fixed
into.
BURNER AND GAS CONNECTORS
The NANO oven is configured to operate with LPG GAS. It cannot be used with Methane or
Natural GAS.
This model is not equipped with a piezoelectric, therefore, a classic long-barreled kitchen lighter
must be used for ignition.
It is necessary to use a low pressure regulator for connecting the NANO oven to
LPG
cylinder. The
regulator must have the below specifications:
•
Gas Input
:
1
.
5 kg/h
•
LOW Pres
sure
regulator
:
28/30 mbar
BURNER TECHNICAL SPECIFICATIONS
Thermal Potential
>
MIN 2 KW – MAX 7 KW
GAS
consumption >
0,47 Kg/h
