11
11 Maintenance
CAUTION
Material damage resulting from blowing out with compressed air
Blowing out the product with compressed air can cause malfunctions and pose a risk of accidents.
►
Never purge the product with compressed air.
CAUTION
Material damage caused by liquid and solvent-based cleaners
Liquid and solvent-based cleaning agents can cause malfunctions and pose a risk of accidents.
►
Do not clean the product with any cleaning agents that are liquid or contain solvents.
NOTICE
Material damage due to leaking lubricant
Excessive lubrication can cause moving machine parts to leak lubricant. This can contaminate the machine,
object being gripped or workpiece.
►
Only use approved or recommended lubricants.
►
Observe the manufacturer information for use of specific lubricants.
►
Adhere to the lubrication interval.
►
Avoid excessive lubrication.
►
Remove leaking lubricant immediately and thoroughly.
►
Replace damaged seals.
Maintenance-free operation of the product is guaranteed for up to 10 million cycles.
Maintenance-free operation of the product can be reduced under the following circumstances:
• Operation with impermissible compressed air
• Dirty environment
•
Improper use and use that does not comply with the power specifications.
• Permissible temperature range not observed
►
Even though the product is maintenance-free as mentioned above, perform a regular visual inspection to check for any
damage or contamination.
►
Have maintenance work be performed by Zimmer Customer Service whenever possible.
Ö
Dismantling and reassembling the product without authorization may result in complications, as special installation
equipment is required in some cases. Zimmer GmbH accepts no liability for any resulting malfunctions or damage.
12 Decommissioning/disposal
INFORMATION
When the product reaches the end of its operational phase, it can be completely disassembled and disposed of.
►
Disconnect the product completely from the power supply.
►
Dispose of the components properly according to the material groups.
►
Comply with the locally applicable environmental and disposal regulations.
INSTALLATION AND OPERATION INSTRUCTIONS:
GHK6000
DDOC00313 / a
EN / 2023-02-13
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
Summary of Contents for GHK6000
Page 2: ......
