20
11.3 Switching sequence of GEP2000IO-05 and GEP2000IO-00 for teaching-in the end position
This function can be used to teach in the end positions of the product.
►
Make sure that both input signals are switched for 5 seconds after a restart.
Ö
The product opens and closes several times and then stays open.
Ö
The factory default settings are "BasePosition" and "WorkPosition."
Ö
Teaching in the end position again prevents the product from being unnecessarily energized when it is in the end
position.
►
In the case of a mechanically limited end position, teach in the end position again.
24 V
0 V
24 V
0 V
PIN 2
PIN 4
Cold start
> 5 ms
INSTALLATION AND OPERATING INSTRUCTIONS:
GEP2000
DDOC01113 / b
EN / 2022-05-01
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
