16
10.2 Installing the sensors
INFORMATION
A sensor can be installed as an option in all installation sizes.
The sensor and the appropriate attachment kit are not included in the scope of delivery.
You can purchase the sensor and the appropriate attachment kit as accessories.
The appropriate attachment kit is required for installing the sensor.
►
For information on optional accessories and those included in the scope of delivery, refer to our website.
The appropriate attachment kit is required for installing the sensor.
bn
bo
►
Install the attachment kit on the product using the countersunk screw.
bn
Attachment kit
bo
Countersunk screw
INFORMATION
►
For further information on installing the magnetic field sensors, refer to the current installation and operating
instructions for the product on our website.
• MFS02-S-KHC-P2-PNP
The sensor is used for piston position sensing.
bp
►
Teach both switching points of the sensor
to the
Open
switch position at an operating
pressure of 5.5 bar.
bp
Sensor
10.3 Installing accessories
NOTICE
Before installing an accessory, make sure it is suitable for use with the selected variant.
►
You can find information on our website.
►
Please contact Zimmer Customer Service if you have any questions.
INSTALLATION AND OPERATING INSTRUCTIONS:
DKPS1000
DDOC01621 / a
EN / 2022-10-04
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
Summary of Contents for DKPS1000 Series
Page 2: ......
