11
10.2 Installing the energy supply
10.2.1 Connecting consumers
NOTICE
►
You can find the information in the technical data sheet on our website.
►
Close off unused connections using pressure-resistant closures.
►
The authorized connections that are available can be found in the accessories list on our website. The
necessary ordering information can also be found there.
You can only use one or both pneumatic
connections.
1
1
2
►
When using both pneumatic connections,
add together the cycle times as well as the
volumes of all connected consumers and
compare this value with the values to be
observed.
►
Remove the seal with an Allen key.
1
Pneumatic connection
2
Seal
►
Insert the screw fitting into the connection
designated for this purpose.
3
1
1
2
►
Connect the consumer via the screw fitting.
1
Bleed connection
2
Push-fit fitting
3
Quick exhaust valve
INFORMATION
Recommendation
►
Mount an additional quick exhaust valve in proximity to the consumer for quick bleeding of the consumer
connected to the P2 pneumatic connection.
►
Keep the hose length as short as possible for a quick air supply and bleeding.
INSTALLATION AND OPERATING INSTRUCTIONS:
AEPN1100-00-A
DDOC01693 / a
EN / 2023-03-20
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
Summary of Contents for AEPN1100-00-A
Page 2: ......
