BlackKite, Vehicle Tracking System User Manual
Rev. 1.4.0
Zilogic Systems
Page 35
The current server IP address and port settings can be obtained using the following command.
Command
GET SERVER
Response
OK: SERVER <ip>,<port>
The field definitions are listed below.
ip
Server IP address.
port
Server port number.
Vehicle Data Transmission Period.
The period of vehicle data transmission to server is config-
urable. The vehicle data transmission period when the vehicle is idle and when vehicle is moving
can be specified individually, through the following command.
Command
SET PERIOD <idle>,<moving>
Response
OK: PERIOD <idle>,<moving>
The current transmission period can be obtained using the following command.
Command
GET PERIOD
Response
OK: GET <idle>,<moving>
The field definitions are listed below.
idle
The transmission period in seconds, when the vehicle is idle
moving
The transmission period in seconds, when the vehicle is moving
SMS Access Control List.
The phone nos. to be recognized by the device can be configured using
the following command.
Command
ADD SMSACL <phoneno>,<admin>,<alert>,<reserved>
Response
OK: SMSACL <phoneno1> <phoneno2> ...
The current access control settings for a mobile no. can be retrieved using the following command.
Command
GET SMSACL <phoneno>
Response
OK: SMSACL <phoneno>,<admin>,<alert>,<voice>
A mobile no. can be deleted from the list using the following command.
Command
DEL SMSACL <phoneno>
Response
OK: SMSACL <phoneno1> <phoneno2> ...
The list of currently configured mobile nos. can be retrieved using the following command.
Command
LIST SMSACL
Response
OK: SMSACL <phoneno1> <phoneno2> ...
The field definitions are listed below.
phoneno
mobile no. in international format. Example: +919444107437
admin
Value is either
1
or
0
.
1
indicates that the mobile no. corresponds to an ad-
ministrator.
0
indicates that the mobile no. corresponds to a manager.
alert
Value is either
1
or
0
.
1
indicates that the device must send alert messages
to the mobile no.
reserved
Value should be set to
0
. This field is reserved for future use.
Over Speed Threshold.
The device can be configured to trigger SMS and server alerts, when the
vehicle speed exceeds a threshold value. The threshold value can be configured using the following
command.