ZiLOG Zdots eZ80AcclaimPlus, User Manual

Page: 15 / 34

UM024401-0412 Installing the USB Smart Cable Driver
eZ80AcclaimPlus! Development Kit
User Manual
5
<ZDS II Installation Directory>\device drivers\USB\x32

<ZDS II Installation CD>\device drivers\USB\x32
On 64-bit Windows 7 systems, navigate to:
<ZDS II Installation Directory>\device drivers\USB\x64

<ZDS II Installation CD>\device drivers\USB\x64
8. Click
Next
to install the driver. On 32-bit: Windows systems, a security dialog will
appear; select Install this driver software anyway .
9. Click
Close
after the Wizard finishes the installation.
Windows Vista 32/64 Systems
Observe the following steps to install the USB Smart Cable on a Windows Vista system.
1. Connect the USB Smart Cable to a USB port on the development PC.
2. After the PC detects the new hardware, it will display the Found New Hardware Wiz-
ard dialog box. Click Locate and install driver software (recommended) .
3. Depending on your development PC’s User Account Control settings, Windows may
ask for permission to continue the installation. Click Continue .
4. When the Insert the Disc dialog appears, select
I don’t have the disc. Show me other
options. Click the Next button to display the Windows couldn’t find driver dialog.
5. Select
Browse my computer for driver software (advanced)
to display the Browse
For Driver dialog, which prompts you to key in or browse for the location of the driver’s
.inf
file. Depending on the type of computer you use (32- bit or 64-bit), use the
Browse... button to navigate to one of the following paths, then click the Next button.
On 32-bit Vista systems, navigate to:
<ZDS II Installation Directory>\device drivers\USB\x32

<ZDS II Installation CD>\device drivers\USB\x32
On 64-bit Vista systems, navigate to:
<ZDS II Installation Directory>\device drivers\USB\x64

<ZDS II Installation CD>\device drivers\USB\x64
6. When the Windows Security dialog prompts you whether to install or not install, click
Install this driver software anyway
and wait until the installation is completed (Win-
dows may prompt you more than once).
7. When the software has been installed successfully, click
Close
.