Z8 Encore! XP
®
F0822 Series Flash MCU Development Kit
User Manual
UM015006-1207
Z8
Encore!
XP
®
F0822 Series Flash MCU
9
External Interface Headers JP1 and JP2
The external interface headers, JP1 and JP2 contain no connectors when
the board is shipped. You can insert 0.1" space connectors of choice.
Table 1. Jumpers JP3 and JP4
Jumper
Status
Device
Affected
Status
Default
JP3**
OUT*
RS-232
interface
Enabled
X
JP3
IN
RS-232
interface
Disabled
JP4
OUT*
IrDA
interface
Enabled
JP4
IN
IrDA
interface
Disabled
X
* These jumpers must not be OUT at the same time.
**
If the module is plugged onto an eZ80
®
Evaluation platform or eZ80
demonstration board the local RS-232 can be disabled by connecting header
JP2 pin 50 to the corresponding GND on the mating connector
.
