1
SZ-ESW01 ZigBee Energy Switch Installation Guide
SZ-ESW01 is an electrical power measuring device, which with its embedded radio frequency (RF) technology that is compatible
with ZigBee enabled devices, regardless of the manufacturer and can also be used with other devices with the ZigBee logo.
Furthermore, SZ-ESW01 can works as a signal repeater that will extend the wireless transmission range and increase the reliability
of your network. With a ZigBee compatible gateway and software program, you’ll also be able to monitor and inform the energy
usage of the connected appliance.
Specification
Radio Frequency
2.4GHz
RF Communication Range
Open Air
：
100M (Max)
LED Indicator
Red / Greed LED x 1
Power Source
120 VAC
Max Load
15A
Dimensions (H x W x D)
91.7 mm x 57 mm x 40.7 mm (3.61” x 2.24” x 1.6”)
Operation Temperature
0° - 45°C (32° - 113°F)
Storage Temperature
-20° - 70°C (-4° - 158°F)
Package Contents
Warnings and Cautions
•
To be installed and/or used in accordance with appropriate electrical codes and regulations.
•
If you are unsure about any part of these instructions, please consult a qualified electrician.
•
To reduce the risk of overheating, do not install near heat sources, such as fires, boilers or heating vents.
•
Do not locate the device facing direct sunlight or humid place.
•
Save this instruction sheet. It contains important technical data, which will be useful for future reference.