1
SR-32ZBS Wireless Indoor Siren
Introduction
SR-32ZBS is a ZigBee Indoor Siren. It is capable of raising alarm upon receiving alarm signal from the
coordinator in the ZigBee network when an alarm is activated. During the alarm, the Siren will sound
alarm with its built-in siren to attract attention.
The Siren utilizes ZigBee technology for wireless signal transmission. ZigBee is a wireless
communication protocol that is reliable and has low power consumption and high transmission efficiency.
Based on IEEE802.15.4 standard, ZigBee allows a large amount of devices to be included in a network
and coordinated for data exchange and signal transmission
The Siren serves as an end device in the ZigBee network. It can be included in the ZigBee network to
receive alarm signal, but cannot permit any other ZigBee device to join the network through the Siren.
Parts Identification
1. Tamper Switch
The Tamper switch will be activated when the Siren is removed
from mounted surface, or it cover opened.
2. Battery Compartment
.The Siren is powered by two 1.5V D-Cell alkaline battery.
3.
Battery Switch
The battery switch is used when battery is installed in the Indoor
Siren. To power on/off the Indoor Siren, switch the ON/OFF
button.
4. Mounting Holes x 3
5. Function Button
- Press the button once to send a supervision signal.
- Press and hold the button for 10 seconds then release to
reset the Siren.
6. Alarm Length Dip Switches
The Dip Switches contain 4 switches which can be set to either
ON or Off position
DIP Switch 1&2 can be turned ON/OFF to determine Alarm
Length. DIP Switches 3&4 are reserved.
7. LED Indicator
LED flashes twice:
- The Siren has successfully joined the ZigBee network.
LED flashes every 20 minutes:
- The Siren has lost connection to its current ZigBee
network.
ON
OFF
