TECHNICHAL DATA AND AND LABELLING
42
Any other form beyond these specifications and is classed as non-intended use. The manufacturer is
not liable for any damage resulting from this form of use. The risk is borne by the operator alone.
Intended use includes the maintenance of the operating, maintenance and servicing conditions
specified by the manufacturer.
Unauthorized alterations made to the machine can exert a negative influence on the machine and
impair the orderly function. Unauthorized alterations release the manufacturer from any resulting
liability claims.
4.4 Technical data
All the information, diagrams and technical specifications made in these operating instructions
correspond to the latest state of technology at the point of publication.
We reserve the right to make alterations to the design at any time and without the need to specify
reasons.
Specifications
Working width
(m)
3
Tripping height teeth
(cm)
16
Bar spacing
(cm)
80
Weight (kg)
1800
Length
(m)
3,8
Min. power requirement
(PS)
125
Frame height
(cm)
86
Number of discs
8 (Ø 46cm)
Clearance between the
lines
(cm)
30
Transport width (m)
3
Number of teeth
10