23
4.3 Attaching the cornheader
Fig. 15
Adaption to the harvester
Place the cornheader on the parking supports.
Check the correctness of the adaption parts.
Move the harvester to the picker.
Lift up the picker with the feeder channel.
Check the correct position of the adaption (A).
The presence of persons between the
harvester and the cornheader is imper-
missible during the connection.
Fig. 16
Locking the cornheader on the feeder channel
Attach the picker (R) in accordance with the settings
performed by the harvester.
Caution: The lock can vary according to the model of
combine harvester.
Fig. 17
Additional lift cylinder
Depending on the size and weight of the cornhead-
er, one or two additional hydraulic cylinders (Z) could
be required.
Corresponding sets are held ready by the manufac-
turer of the combine harvester.
Depending on the design of the cornheader and the
bearing capacity of the individual harvesters, addi-
tional weights may be required on the steering axle
or water must be filled in the tyres.
Comply with the regulations of the manufacturer of
the combine harvester and the TÜV certification.
A
R
Z
R
