MOUNTING THE CROP DIVIDER HEADS
25
25.
Mounting the Crop Divider Heads
Diagram 22
Raising the hinged covers
The crop divider heads are delivered ready-mounted at the deliv-
ery.
These must be folded in downward direction.
In order to view the inlet chains, the hinged covers must be raised
upwards and the respective holding rod inserted into the respec-
tive fixture.
Shut down the corn header before raising the hinged
cover!
Diagram 23
Inner hoods
When folding the corn header, it is necessary to fold the divider
points upwards and secured/locked with the pin.
When unfolding the corn header, the divider points must be un-
locked.
Diagram 24
Setting of the crop divider heads
Remove the safeguard against lowering.
Lower the picker on a even surface down to height of approxi-
mately 10 cm.
Adjust the crop divider heads with the respective screw so that
there is still clearance of 2 cm from the ground (normal setting).
If the thresher sinks in significantly in the field, the setting must be
accordingly aligned.
