chapter 4:BIOS Setting
Boot Up Floppy Seek
Specify whether floppy drive A: will perform a Seek operation at system boot.
Default setting is "Disabled".
Boot Up NumLock Status
Set this option to "OFF" to turn the Num Lock key off when the computer is
booted so you can use the arrow keys on both the numeric keypad and the
keyboard. Default is "ON".
Gate A20 Option
Sets "Fast", lets chipset control Gate A20; Sets "Normal", lets a pin in the
keyboard controller control Gate A20. Default setting is "Fast".
Typematic Rate setting
Enabled / Disabled Typematic Rate setting, when enabled,the typematic rate
and typematic delay can be selected. Default setting is "Disabled".
Security Option
Enables password checking every time the computer is powered on or every
time BIOS Setup is executed. If System is chosen, a user password prompt
appears every time the computer is turned on. If "Setup" is chosen, the
password prompt appears if BIOS Setup is executed. Default is "Setup".
APIC Mode
Enables advance program interrupt control
MPS Version Control For OS
Options are 1.1 and 1.4.Default is "1.4".
OS Select For Dram > 64MB
Set to "Enabled" if running OS/2 operating system and using more than 64MB
system memory. Default is "Disabled".
Report No FDD For Win95
Selects "YES"when the system is running Win95 and no FDD is installed.
Default is "NO".
Small logo(EPA) Show
Enable/Disable EPA logo to be shown during bootup.
page 35
Mainboard Manual
B
IO
S
S
e
tt
in
g
