Chapter 2:Product Introduction
P4 Power Connector
This is a simply diagram of P4 Power connector,which supply 5V and 12V
standard Voltage and so on.
COM2 header
COM cable to connect with it.The red line of cable correspond
with pin1 of the header.
USB header
use cable to connect with it. It support two usb port.
The red line of
cable correspond with pin1 of the header.
IRDA connector
The header pin-out is as follows
Pin Signal Name
1
VCC,power source
2
No Connection
3
IRRX, infra-red receive
4
Ground
5
IRTX, infra-red transmit
WOL Header
The Wakeup-Link header used to connect an add-in NIC(Network
Interface card) which has Wake-on-Lan capability.
page 16
Mainboard Manual
1
(Only for A845E)