Zhone zNID-GPON-2402, Configuration Manual

Page: 104 / 226

Configuration
104
zNID 24xx Series Configuration Guide
Ethernet
The Interfaces | Ethernet page provides the mechanism to modify Ethernet
parameters for Ethernet interfaces.
Figure 76: Ethernet parameters
Table 37: Ethernet settings
UI Label Description
Admin State •
Enable - Port is enabled and a link has been established
•
Disable - Port is disabled (administratively down)
•
NoLink - Ethernet Port is enabled, but no device is
connected
Max Bit Rate The maximum possible bit rate of the physical layer
•
10 - 10 Mbps
•
100 - 100 Mbps
•
1000 - 1000 Mbps
•
Auto
Duplex Mode Full or Half Duplex
Pause In Ethernet flow control, a pause frame request stopping
transmission, so the receiving device can catch up.
•
Enable -
•
Disable - Pause frames are disabled
•
Auto - Pause