Zhone IMACS 8000, User Manual

Page: 479 / 788

Data Cards 15-5
OHSU-4P Card OHSU Card User Screens and Settings
Table 15-1. OHSU Card Main Screen Actions
Table 15-2. OHSU Card Setting Options and Defaults
STATE
The State setting determines whether the port is active or inactive. An inactive port does not
occupy time slots on a WAN link. Set State to standby (stdby) for ports you are not using or
have not yet configured. Set it to active (actv) for ports that are ready for use.
WAN/SRV
The WAN/SRV setting identifies the card to which the output of this port is directed. Only wan
can be chosen, the data from this card port will be directed to a WAN port (the options are
w1-1 to w4-2).
MODE
The Mode parameter appears for information only. The OHSU is fixed in the MUX mode.
Action Function
Save Saves changes to settings.
Undo Returns all settings to the last saved state.
Refresh Updates certain time-related information fields that are not automatically
updated (i.e., performance and test data).
Copy Copies the contents of the current column to the next column. Useful if you
change a lot of entries in one column and want to repeat those changes in
subsequent columns.
Test Initiates and monitors testing of all OHSU Card ports. Refer to the Test
section of this chapter.
Perf Brings up the Performance Data Screen.
Main Returns to the System Main Screen. If changes are made to settings and not
saved, you will be prompted to save or lose changes.
Parameter User Options Default
STATE stdby actv stdby
WAN/SRV wan (W1-1...W4-2)
serv (P1-P3)
hsu (U1-U8) none
MODE mux mux
TS table (up to 12 TS) no assignment
RATE 64k 64k
TX CLOCK int (mux MODE) int
LOCAL LB off user net off