Zhone IMACS 8000, User Manual

Page: 464 / 788

14-44 Data Cards
Model No.
Running Head
HSU Card User Screens and Settings HSU Card
Table 14-17. MUX Call Screen Actions
If the IMUX Call is yes, the selection for Channel Rate will be 01=56, 02=64 and 03=H0. If
the IMUX Call is used, the selections for Rate Multiplier will be 02-30 for 56/64 and 2-3 for
H0.
14.3.14.1 Example
The command, *64122, sets the current value of Present. Indctr to no.
The command, *640303, sets the Called Number TYpe to sbscr. Call Profile changes
permanently alert the active call profile for this HSU port.
The information presented in this section is listed in the RS366 dialing matrix shown in Table
14-18.
14.3.15 Master Dialing
Master Dialing, discussed previously, is another unique application for RS366 dialing for the
system when using an 8213 HSU RS366 dialing port to dial for any other HSU card in the
system. A different command string is used to make these changes.
The command string is: [escape character] [35] [slot number] [port number], where “slot
number is the user card (1-8) and “port number” is the port in that slot to which subsequent
dialing commands should be applied.
The command: *3511, would indicate that the next series of commands would apply to port
#1 of the HSU card in slot U1.
Parameter
Name
Parameter
Number
Parameter Value
DChan 01 a number from 01-08
Called # 02 4 through 25 numeric characters can be entered
Called # Type 03 01=natnl, 02=intnl, 03=sbscr
Called # Plan 04 01=unkwn, 02=isdn, 03=phone, 04=print
Channel Rate 05 01=56u, 02=56r, 03=64u, 04=64r, 05=364u, 06=364r, 07=1536r, 09=MRate
Rate Multiplier 06 02-24 (only available if MRate is chosen)
IMUX Call 07 01=no, 02=yes
Service 08 01=first billing plan, 02=second billing plan, etc.
Calling # 09 4 through 25 numeric characters can be entered
Calling # Type 10 01=natnl, 02=intnl, 03=sbscr
Calling # Plan 11 01=unkwn, 02=isdn, 03=phone, 04=print
Present. Indctr 12 01=yes, 02=no
Screen. Indctr 13 01=up-ns