Zhone IMACS 8000, User Manual

Page: 116 / 788

5-34 Reference Guide
Model No.
Running Head
System Level Maintenance System Configuration and Operation
4. Select TFTP and press Enter.
5. You will receive an NV Ram image overwrite confirmation message. Press “Y” for yes.
6. Enter the desired number of Mismatch retries and press Enter.
7. Enter the desired number of Timeout Retries and press Enter.
8. Enter the IP address of the PC or TFTP server and press Enter.
9. Enter the filename for the backup you wish to restore and press Enter. Restoration begins.
10. Following completion of the restoration process, the system will prompt to restore data
with the image that was uploaded. Press “Y” for yes.
11. The system asks to reboot. Press “Y” for yes. The system reboots and configuration
becomes active.
5.12.8 ASCII Backup Procedure
Follow the steps listed below to perform an ASCII backup.
1. Log into the Integrated Access System.
2. Press “Y” for System at the main menu.
3. At the Test and Debug screen press “B” for Backup.
4. The NV Ram Backup screen appears. Using the arrow keys to navigate the cursor,
highlight the Protocol selection and press Enter.
5. Using the arrow keys highlight ‘ascii’ (ASCII is the normal default selection) and press
Enter.
6. Prior to starting the backup and restore process you must set the terminal emulation
package to XMODEM1K or XMODEM, otherwise the process will fail.
7. From the Terminal Emulation window select Capture Text File. The system will prompt
for the desired filename and path to store the backup file. Following entry of this
information press Enter.The filename must include
.txt
as an extension or the backup will
not function properly.
8. From the NV Ram Backup screen press “G” for Go. The Integrated Access System begins
transferring the configuration to a text file. Upon completion, the system prompts you to
enter “m”. You must first select Capture Text from the Terminal Emulation Menu and
select Stop. You may then proceed with pressing “m”.