background image

20

Disclaimer and Warnings

Safe Operation Guidelines

1. This product is a high-precision control device. Damage may be caused to 

FIVERAY F100 if dropped or subject to external force, and this may result in 

malfunction.

2. It is recommended to keep your hands dry while using FIVERAY F100 and use 

dry cloth for cleaning.

3. Keep this product out of the reach of children.

4. Protect FIVERAY F100 from dust and sand during use. 

5. Do not disassemble this product personally. In the event of malfunctions, it 

should be repaired by ZHIYUN’s or other authorized maintenance personnel.

WARNING:To avoid fire, serious injury, and property damage, observe the 
following safety guidelines when using, charging, or storing your batteries.

1.Prevent the batteries from coming into contact with any kind of liquid. Do 

not leave batteries out in the rain or near a source of moisture. Do not drop 
the battery into water. If the inside of the battery comes into contact with 
water, chemical decomposition may occur, potentially resulting in the battery 
catching on fire, and may even leading to an explosion.

2.If the battery catches fire, use sand or dry powder fire extinguisher immediately 

to put out the fire. 

3. Never use non-ZHIYUN batteries. If replacement or backup is needed, please 

purchase new batteries from ZHIYUN's official website or authorized channels. 
ZHIYUN takes no responsibility for any damage caused by non-ZHIYUN 
batteries.

4. Never use or charge swollen, leaky, or damaged batteries. Never use or charge 

if the battery smells, or overheats (exceeding the maximum temperature of 
160 ° F/71 ° C). If your batteries are abnormal, contact ZHIYUN or a ZHIYUN 
authorized dealer for further assistance.

5. The battery should be used within the temperature range from -10° C to 45° C. 

Use of battery in environments above 45° C may lead to a fire or explosion. Use 
of battery below -10° C may lead to serious battery damage.

6. Do not use the battery in strong electrostatic or electromagnetic environments. 

Otherwise, the battery protection board may malfunction.

7. Do not disassemble or use any sharp object to puncture the battery in any way.

Otherwise, the battery may leak, catch fire or explode.

DO NOT use with incompatible components or in any way otherwise as 
mentioned or instructed in the product documents provided by ZHIYUN. 
The safety guidelines herein contain instructions for safety, operation and 
maintenance. It is essential to read and follow all of the instructions and warnings 
in the User Guide, prior to assembly, setup or use, in order to operate the product 
correctly and avoid damage or serious injury.

Summary of Contents for FIVERAY F100































Reviews: