Zgonc Yellow GARDEN LINE 720 YGL N.G. NEW GENERATION, Translation Of Original Instruction Manual

Page: 44 / 64

Shear Pins
The augers are secured to the auger shaft with shear pins and clevis pins. If the auger
should strike a foreign object or ice jam, the snow thrower is designed so that the pins
may shear, preventing damage to any other components. If augers will not turn, check
to see if the pins have sheared. Replace the shear pins if necessary.
Do not substitute. Use only original equipment shear pins as supplied with your snow
thrower.
Auger
When engaged, the augers rotate and draw snow into the auger housing.
Discharge Chute
Snow drawn into the auger housing is discharged out the discharge chute.
Chute Clean-Out Tool
m
Never use your hands to clear a clogged discharge chute . Shut off engine and remain behind handles until all moving parts have
stopped before unclogging.
The chute clean-out tool is conveniently fastened to the rear of the auger housing with a mounting clip. Should snow and ice become
lodged in the discharge chute during operation, proceed as follows to safely clean the discharge chute and chute opening:
1. Release the auger clutch lever and shut off the engine.
2. Remove the clean-out tool from the clip which secures it to the rear of the auger housing.
3. Grasp the tool firmly by the handle and push and twist the tool into the discharge chute to dislodge the blockage.
4. Refasten the clean-out tool to the mounting clip on the rear of the auger housing.
5. Make sure the discharge chute is pointed in a safe direction (no vehicles, buildings, people, or other objects are in the direction of di
charge). Restart the engine. While standing in the operator’s position (behind the snow thrower), engage the auger control for a few
seconds to clear any remaining snow and ice from the auger housing and the discharge chute.
Headlight
The headlight provides added safety in low-visibility conditions. Turn the headlight
switch to the ON position to activate.
Differential Lock Trigger (if so equipped)
The differential is locked for maximum traction. With the differential locked, power is
applied equally to both wheels/tracks.
The differential lock trigger is located on the underside of the left handle. Squeeze the
trigger to release the differential lock for easier turning.
44
D GB