8.
Rotate the intermediate gear several times
and use 5870.700.004 [Load cell],
5870.200.094 [Measuring arbor] and a press
to preload the bearing with 10 kN.
9.
Place dial gauge at the inner surface.
10. Evenly lift the intermediate gear with a pry
bar and check the necessary setting of the
intermediate gear bearing 0.01 mm preload–
0.05 mm clearance.
If the required axial play is not reached,
replace the shim as specified below:
▪ In case of an insufficient axial play,
install a thicker shim.
▪ In case of an excessive axial play,
install a thinner shim.
11. Mark the installation position of the individual
parts.
12. Dismantle the individual parts.
Fig. 206
13. Insert the tapered roller bearing into the
portal housing.
14. Insert the intermediate gear into the portal
housing.
Fig. 207
Assembly
106
EN 4472.751.001 - 2015-11
Summary of Contents for AV 133
Page 1: ...REPAIR INSTRUCTIONS AV 133 Bus axle with compact bearing BUSES...
Page 137: ......
