![background image](http://html.mh-extra.com/html/zf/av-110/av-110_repair-instructions_932414050.webp)
3.
Remove O‑ring (1).
4.
Slide AA02.041.051 [Driver tool] onto the
drive gear (stub shaft).
Fig. 54
5.
Pull tapered roller bearing from portal
housing by means of AA01.311.408 [Rapid
grip] and 5873.002.001 [Basic tool].
6.
Remove shim.
Fig. 55
7.
Slide AA02.049.488 [Disassembly device]
onto the drive gear (stub shaft).
8.
Tighten cylindrical screws of
AA02.049.488 [Disassembly device] evenly.
Tightening torque: 68 Nm
9.
Use AA02.049.488 [Disassembly device] and
a two-armed puller to pull the drive gear out
of the portal housing.
Fig. 56
Dismantling
50
EN 4472.751.001 - 2015-11
Summary of Contents for AV 110
Page 1: ...REPAIR INSTRUCTIONS AV 133 Bus axle with compact bearing BUSES ...
Page 137: ......