Installation and operating instructions V00 27
Five conductors must be inserted into the corresponding holes of the
AC terminal block! Otherwise it may cause damages to the inverter. The
warranty does not cover the aforementioned damage.
4.
Insert the crimped conductors L1, L2, L3, N and PE into the corresponding AC
terminals through the cable gland and tighten the screws on the terminal block,
using a flat blade screwdriver (blade size: 1.0 x 5.5mm) with torque 3.0Nm.
5.
Tighten AC cable gland swivel nut (SW46) by hand. Pre-screw 4 screws in lower
cover and tighten them in the sequence (1-2-3-4). Screwdriver type: T25, torque:
2.5Nm.
Summary of Contents for Zeverlution Pro 33K.
Page 1: ......
