6
4.
Auto Power Off
When the battery runs low, the blue
light will blink and
then the zPen-1080p will shut down.
When the memory is full the light will blink blue and
green and the zPen will shut down.
If you leave the zPen in Standby mode (solid blue light)
after a minute of no interaction the zPen will shut off.
5.
Charging the Battery
The zPen-1080p has an internal, rechargeable battery. The
battery can be charged several ways.
Connect the zPen to a USB port on your computer.
Plug the zPen into the USB to DC 5V adapter.
The light will Flash Blue while Charging
When fully charged the light will remain Solid Blue.
6.
Resetting the zPen
In the event of an error, the zPen-1080p can be reset by
inserting a pin or needle or sim-card tool into
the Reset Hole and holding it for several seconds.
Summary of Contents for zPen-1080p
Page 1: ...1...
