ZETRON 4000 Sereis, Manual

Page: 91 / 160

91
Operation
Figure 19: iDEN Channel Box
Table 8: iDEN Operation Call Progress Messages
Indication Description
Rad Discon The connection between the channel card and the radio is not
responding.
Out of Svc The radio is not connected to the iDEN network.
Register The radio is connecting to the iDEN network.
In Service The radio is connected to the iDEN network. The radio is idle.
Started... A call (either transmit or receive) is being initiated.
Receive.. A receive call is active.
Transmit.. A transmit call is active.
Hang.... Either a receive or a transmit call is pending.
Alert OK The call alert transmission was successful.
Alert Fail The call alert transmission was unsuccessful.
Tgt Nt Rsp The target specified is not responding.
Tgt No Exs The target specified does not exist in the system.
NoKey 2 TG Radio is not allowed to key on secondary talkgroup.
Alrdy Keyd Radio has already been keyed up.
Alrdy DeKd Radio has already been keyed down (dekeyed).
Rad Locked Radio is security code locked.
Inv AreaID The target area specified was invalid.
Svc Active Service is active.
ISO Isolated Site Operation
InvFtMbrID The Fleet Member ID entered is invalid.
FNE Dni Rq FNE (the network) had denied the radio’s request.
Usr Cnc Rq The user has canceled a request.
Rad Timeout The radio has timed out on a given operation.
RadDeniReq The radio has denied the given request.
Chan Fail The channel the radio keyed up on has failed.
Sys Busy The system (the network) is busy.
Access Fail Access to the system (the network) has failed.
CHANNEL TITLE
CALL GRP
CALL PROGRESS
GROUP/INDIV ID
BSY PAT VOL
Active when
receive call is
in-progress
Channel Busy
(Active during
transmit)
Default Call Setup Mode
(Group of Private)
Call connection progress
Group (up to 10 chars.) and
private call ID (up to 15 chars.)
Channel Volume % (0-99)
Patch Active Indication