Operating Button-Based Consoles
50
Table 4: Diagnostic Message Meanings
Message
Meaning
Disconnect
Your console is not communicating with the system. Your console will not
operate until the problem is corrected.
SeeLog
Diagnostics information has been printed on the diagnostics log.
SeeCIC
The Console Interface Card for your console is not communicating with the
system. Your console will not operate until the problem is corrected.
THXnnn
An improper condition exists on your console. nnn is a three-digit, decimal
number that Zetron can use to help isolate the condition. Be sure to record it.
This does not usually prevent normal operation.
CardErr
The programming of channel configurations at your console position does not
match the cards plugged into the common control equipment. Channels that
are affected will not operate until the problem is corrected.
PageErr
An invalid paging parameter has been entered.
PageFull
The maximum number of Instant Call pages assigned to a button has been
exceeded (64).
Summary of Contents for 4000 Sereis
