ZETRON 025-9581M, Installation And Maintenance Manual

Page: 89 / 196

89
Station Transponder Unit Configuration
9. Restart the FSA Server
Move Up/Move Down Buttons
The Move Up and Move Down buttons appear in the upper right of the windows for
station set up as well as for inputs, outputs, and units. These controls are provided to
enable you alter the position of selected items within the lists in which they appear. The
position of a station, unit, input, or output within the list in a programming window
determines the order in which these items will be displayed in the FSA Console window.
Fire Station Definition Settings
Figure 30: Fire Station Definitions Window
The following parameters make up the basic definition of an Station Transponder Unit for
the Fire Station Alerting system.
Name
This is the name that the system uses internally to identify this station. The name can be
from 1 to 30 characters in length and contain both letters and numbers. The name cannot
contain any spaces; however, periods (.) and underscores ( _ ) are allowed. If a CAD
interface is used, this name label will be used in the CAD messages.
Note Remember that you must restart the FSA Server in order for the
new settings to take effect.