Zeroplus X One SE, Manual

Page: 5 / 22

How to use on PS4
1. Toggle the "PS4/Xbox One/Switch slide switch" to where it is labeled "PS".
2. Wired Connection:
Simply connect the controller to console via X One SE's "Upgrade/Charge port".
Wireless Connection:
The first time you use the X One SE, you need to pair it with the wireless
controller: go to the "Bluetooth Device" screen and select "Wireless Controller"
on your console setting. After waking up the controller, press and hold the
"Wireless pairing button" of X One SE for 2 seconds to make the LED of X One SE
blink red and blue alternately, and wait for a few seconds until the LED of X One
SE shows a constant blue light. After that, you only need to wake up the
controller every time you use the X One SE.
Note: In this mode, the X One SE enables the controller to be used with phones
that support Android 10 or iOS 13 or later.
How to use on Xbox One/PC
1. Toggle the "PS4/Xbox One/Switch slide switch" to the bar labeled between "PS"
and “NS”.
2. In this mode, the X One SE is set to off, please use the controller as a normal
connection.
How to use on Switch
1. Toggle the "PS4/Xbox One/Switch slide switch" to where it is labeled "NS".
2. Wired Connection:
Simply connect the controller to console via X One SE's "Upgrade/Charge port".
Wireless Connection:
The first time you use the X One SE, you need to pair it with the wireless
controller: go to the "Controller" screen on your console. After waking up the
controller, press and hold the "Wireless pairing button" of X One SE for 2 seconds
to make the LED of X One SE blink red and blue alternately, and wait for a few