Click the available options to find out more...
Set Start Address
Set DMX Patch
Reset DMX Patch
DMX Input
RDM
Set Start Address
This option allows you to set a DMX start address for the dimmer.
The dimmer channels are then patched automatically as a contiguous block starting at the specified address.
Select the Set Start Address option from the menu, and press the ENT key. The screen shows:
DMX Address
xxx
Enter the DMX address using the numeric keypad or cursor keys, then press the ENT key.
This sets the start address for the dimmer. The screen pauses briefly and then returns to the DMX Controls screen.
Valid DMX Start Addresses
12 channel dimmer: 1 - 501
24 channel dimmer: 1 - 489
Set DMX Patch
This option allows you to set an individual DMX address (1 - 512) for each channel of the dimmer.
Select the Set DMX Patch option from the menu, and press the ENT key. The screen shows:
Channel: xx
DMX: xxx
Zero 88 - Chilli Pro - Page 36 of 60
Printed: 23/03/2021 09:13:40 ES