Zero DS 2013, Owner'S Manual, Page: 87 / 124

General Maintenance
5.23
Turn Signal Light Bulb Replacement
1. Remove the turn signal lens screw (A) and remove the
lens.
2. Push in on the bulb, turn the bulb counterclockwise,
and then pull the bulb out.
3. Insert the new bulb into the socket, push in and turn
clockwise until it stops.
4. Install the lens and screw; tighten the screw. Do not
over-tighten the screw.
Brake/Tail LED Replacement
The brake/tail LED is not serviceable. Please contact your
Zero motorcycle dealer for replacement.
A
O
Zero Owner's Manual (S and DS).book Page 23 Friday, April 26, 2013 4:55 PM