Zero Motorcycles ZERO FX 2016, Owner'S Manual

Page: 87 / 144

General Maintenance
6.19
Adjusting The Drive Chain
Note: Adjust both sides equally.
1. Remove key from the key switch.
2. Loosen the rear axle nut (A).
3. Loosen the (left and right) 13 mm jam nuts (C).
4. Turn the (left and right) 13 mm adjustment bolts (B)
1/4 turn at a time until the chain adjustment is within
specification.
5. Tighten left and right jam nuts (C) to secure the chain.
6. Tighten the axle nut (A).
7. Test ride the motorcycle.
8. Recheck the chain for proper adjustment after the test
ride and readjust, if necessary.
Zero Owner's Manual (FX and FXS).book Page 19 Monday, December 14, 2015 3:02 PM