Zero Motorcycles FX 2022, Owner'S Manual

Page: 97 / 164

General Maintenance
6.25
Front Panel - FXE
The front panel must be removed to gain access to the 12 volt fuse
center.
Removing the front panel
1. Remove the seat. See “Seat Removal - FXE”, on page 6.23 .
2. Remove the left and right side panels. See “Side Panel -
FXE”, on page 6.24 .
3. Remove two T25 Torx bolts (A) securing front panel to frame.
Torque - 3.5 lb·ft (5 Nm).
4. Remove two 8mm nuts (B) and collect washers securing
front panel to frame. Torque - 3.5 lb·ft (5 Nm).
5. Remove two cross-head screws (C) securing front panel to
frame.
6. Remove six 3mm Hex head bolts and collect washers
securing close-out panel to front panel. Torque - 2 lb·ft
(3 Nm).
7. Remove front panel.
Installing the front panel
1. Installation of the front panel is the reverse of the removal
procedure.
Zero Owner's Manual (FX and FXS).book Page 25 Thursday, May 13, 2021 10:53 AM