manualshive.com logo in svg

Zero Motorcycles DS 2021, Owner'S Manual

Share
Download
Zero Motorcycles DS 2021 Owner'S Manual Download Page 83

General Maintenance

6.11

Rear Brake Fluid Reservoir

The reservoir is located inboard on the frame behind the heel 
guard. 

Note: The motorcycle should be in an upright position prior to 
checking fluid level.

Inspect the level of the rear brake fluid through the reservoir  
housing. If the fluid level is visibly below the low minimum 

LOWER

 indicator (C), brake fluid must be added until level 

reaches the upper 

UPPER

 indicator (B). Do not overfill. 

Clean any dirt or  debris from the cap  and reservoir opening (A) 
before opening the reservoir. 

Unscrew the cap and  add new DOT 4 brake fluid. Inspect the 
cap seal  ensuring that it is free of any wear or damage then  
reinstall the cap. 

Zero Owner's Manual (S and DS).book  Page 11  Monday, September 21, 2020  11:43 AM

Summary of Contents for DS 2021

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands