Zero 88 FLX Series, Manual

Page: 173 / 233

Mouse controls Pan & Tilt
This allows you to control the Pan and Tilt of a moving light by using an external USB device, such as a mouse or
trackball. When enabled, this device will control the Pan and Tilt of any selected device when the “Position” attribute
button is selected on the front panel.
Record & Update
The Record & Update options of the Settings tab, allow for the Record
& Update window to be configured, and the global tracking options to
be set. These are explained below:
Show Record & Update Window
This can be changed to decide when these two windows should be shown during programming.
When held means the windows will only be displayed on the internal touchscreen when the Record or Update
buttons are held for around half a second. This is useful if you are regularly programming palettes using the external
monitor.
On internal display means the windows will be shown on the internal display as soon as the Record or Update
buttons are pressed.
On external display (FLX & FLX S48 only) means the windows will be shown on the external display as soon as the
Record or Update buttons are pressed, but only on the internal monitor if the buttons are pressed and held. This is the
default option.
On both displays (FLX & FLX S48 only) means the windows will appear on both displays as soon as the Record or
Update buttons are pressed.
Tracking Options
This option defines the behaviour of the desk when recording cues. It can be seen a little bit like a Normal (Cue Only)
or Advanced (Enabled) setting. There are two options available:
Cue only means that tracking options will not be available within the Record and Update windows. Cues are
programmed with a full capture of the stage output to ensure what you see on stage is exactly what is programmed,
and exactly what will be played back when you replay the cue.
Enabled means that tracking options will be available within the Record and Update windows. Tracking options can
be changed at any time without affecting cues that have already been programmed.
For more information, click here.
Defaults
Zero 88 - ZerOS - Page 173 of 233 Printed: 23/11/2020 12:50:03 JH