43
(like a Sharpie)
•
Mineral spirits, for cleanup
•
Clean rags
•
A Percolator cabinet kit (no kiddin’)
A WORD ON COUNTERSINKS
The overall success of this project depends somewhat on your ability to accurately countersink the
wood screws, so that the heads lie just below the surface of the wood, but no deeper. There are several
ways to do this:
•
buy a #6 pilot bit (9/64) with matching fluted countersink and stop collar, or an all-in-one #6
pilot / counterbore / countersink tool
•
buy a countersink bit
•
Use a ¼” drill bit in a drill press
The first (shown to the left) is our favorite: very accurate and easy to use. The
second, a countersink bit (shown to the right), is next best. If you don’t do a
lot of wood working, you may not want to invest in these tools. This leaves
using a ¼ drill bit in a press. To do this, first drill through with the 9/64