ZEPIRO D2O RG1, Product Manual

Page: 24 / 36

20 - D2O RG1 Product Manual
Each of the Commands available is explained in more detail in the following
sections.
6.3 COMMAND DETAILS
COMMAND SYNTAX DETAILS
help <cmd>
Displays a help message associated with the command name at parameter
<cmd>
.
Example: Using the
msg
command.
help msg
msg -g : Get next Tx opp. Verbose
COMMAND SYNTAX DETAILS
admin <password>
Allows administrator access to modify the Admin Restricted editable parameters of the
device. All Admin Restricted parameters will be unavailable until this command is applied.
IMPORTANT NOTE: Changes made to Admin Restricted parameters of
acq
and
inp
commands will not be applied until the
apply
command is used.
The parameter for
<password>
should be the currently set administration password for
the device. The default password is
password
The administration access will last for the current session. If the device enters sleep mode
and the message GOODBYE appears in the Serial Terminal software, then the command will
need to entered again upon waking the device.
Using this command will generate a notification message type, advising of the login, that
will be sent via the Zepiro servers.
Example: Using the default
password
to allow administration access. OK message displayed when successful.
admin password
OK -> Remember to use ‘apply’ command to save changes
COMMAND SYNTAX DETAILS
apply <A or D or F>
Accepts (
A
) or Discards (
D
) changes made to Admin Restricted parameters of
acq
and
inp
commands when administrator access has been enabled.
Entering parameter
F
restores all modifiable
acq
and
inp
command parameters to their
factory defaults.
This is an Admin Restricted c ommand and cannot be set until the
admin
command has
been executed.
IMPORTANT NOTE: Changes made to Admin Restricted parameters of
acq
and
inp
commands will not be applied until the
apply
command is used. Failing to apply
the modified parameters can result in the Commissioning Report displaying incorrect
values.
Example: Using the
A
parameter to accept changes. OK message displayed when successful.
apply A
OK