Zephyr BL-29900 Operating Procedure Download Page 1

Page: 1 / 2

Fixed Hoist Test Facility Operation and Maintenance Manual ZOM-12000-9 rev 0

Zephyr International LLC *5015 Enoch Rd, Conway SC 29526 * Phone 843-365-2675 *Fax 843-365-2677

Web

www.zephyrintl.com

Serving Helicopter Rescue Hoist Users Worldwide

Operating Procedure

BL-29900

Start Up

1. Install Hanging Hoist Mount, Arm using the pins and retaining pins

2. Install hoist on mount using the pins and retaining pins

3. Raise mount into position, install the pins in the load cells, lower chain hoist to apply

the load to the lead cells

4. Attach the Electrical harness connectors

5. Attach the 400Hz power cable to the receptacle

6. Turn on the 3 phase 400 hz power switch

7. Position the Zephyr RHGSE under hoist

8. Turn the Power switch on the control box to on, the load indicator should illuminate

9. Activate the hoist select switch on the control box to select the BL-29900 hoist

10. Press the Tare button on the load display to zero out the load with no load on the

cable

11. Operate the hoist using pendant, or pilot override

12. Attach the rescue hoist cable to the Zephyr RHGSE and operate the hoist in the

down direction

13. Follow the operating instructions for the Zephyr RHGSE while running the hoist

Summary of Contents for BL-29900

Page 1: ...er chain hoist to apply the load to the lead cells 4 Attach the Electrical harness connectors 5 Attach the 400Hz power cable to the receptacle 6 Turn on the 3 phase 400 hz power switch 7 Position the...

Page 2: ...Operating Procedure BL 29900 Shut Down 1 Disconnect the rescue hoist cable from the Zephyr RHGSE 2 Retract the cable to full in and insure the full up limit switch activates and the bumper compresses...