9.
Plug in. press down on the power unit for short lengths of time to produce a pulsing action-this will avoid over
processing the ingredients.
z
If the machine labors, remove some of the mixture and continue processing in several batches.
z
Stop the machine and scrape down if necessary.
z
Do not run the super chopper continuously for longer than 10 seconds. Leave to cool for 1 minute in between
each 10 seconds operation.
10.
After use. Unplug and dismantle.
CLEANING AND STORAGE
Never
immerse
in
water
or
other
liquids.
1.
Always switch off and unplug before cleaning.
2.
Handle the cutting blade with care they are extremely sharp.
3.
Some food will discolor. It won’t harm the plastic or affect the flavor of your food.
4.
Wipe power unit and slip mat with a damp cloth, and then dry.
5.
Wash other parts by hand, then dry the thoroughly or wish on the top rack or your dishwasher.
6.
Always undertake a cleaning cycle before putting the unit in a safe place.
7. Never immerse in water or other liquids.
PROCESSING GUIDE
Food
Maximum
Capacity
Preparation
Meat
200g
Remove bones, fat and gristle. Cut into 1-2 cm (1/2-1/4 in cubes)
Herbs eg. parsley
50g
Remove stalks
Nuts eg. almonds
300g
Remove stalks
Cheese eg.
Cheddar
100g
Cut into 1-2cm (1/2-1/4 in cubes)
Bread
75g
Cut into 1-2cm (1/2-1/4 in cubes)
Hardboiled eggs
6
Halve or quarter depending upon size
Onions
250g
Cut into approximate 2 cm (1/4in) pieces
Biscuits
150g
Break into pieces
Soft fruit eg.
raspberries
300g Remove
stalks
ATTENTION
1. Do not place heavy objects on the cables or heat sources close to them . The cables may be damaged;
2. This product is intended solely for domestic use.
3. Before carrying out any cleaning or maintenance, disconnect the appliance from the mains by removing the plug.
4. Do not use aerosols sprays (eg . insecticides , hair spray , etc. ), it may cause damage to the housing;
5. In case of abnormal situations immediately turn off the power and contact your dealer or service center;
6. Do not use this unit connected to programmers, external timer , remote control system of separate timer or any other
device that can switch automatically;
7. Do not use power sockets flying or damaged cables;
8. When you hold it firmly pulls the plug to avoid electric shock, short circuit or fire;
9. Do not attach safety switches with tape, for fire hazard;
10. It is absolutely prohibited to disassemble or repair the unit by the danger of electric shock if necessary contact your
dealer or service center;
