Zenoah GZ330, Operator'S Manual, Page: 3 / 132

3. Air purge bulb
4. Air filter cover
5. Choke control
6. Rear handle
7. Information and warning decal
8. Start/stop switch
9. Fuel tank
10. Adjuster screws carburetor
11. Starter rope handle
12. Starter housing
13. Chain oil tank
14. Right hand guard
15. Spark plug cap/spark plug
16. Muffler
17. Oil pump adjustment screw
18. Chain catcher
19. Throttle trigger lockout
20. Front handle
21. Saw chain
22. Bar tip sprocket
23. Guide bar
24. Air filter
25. Throttle trigger
26. Vibration damping system, 3 units
27. Product and serial number plate
28. Brake band
29. Clutch cover
30. Chain tensioning screw
31. Transportation guard
32. Combination wrench
33. Screwdriver
34. File
35. Grip
36. Operator's manual
Symbols on the product
Be careful and use the product correctly.
This product can cause serious injury or
death to the operator or others.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Always wear approved protective helmet,
approved hearing protection and eye
protection.
Chain brake, engaged (right). Chain
brake, disengaged (left).
Choke lever in work position.
Choke lever in choke position.
Air purge bulb.
Adjustment of the oil pump.
Fuel.
Chain oil.
Use 2 hands to operate the product.
Do not operate the product with one hand
only.
Warning! Kickback can occur when the
guide bar tip touches an object. A
kickback causes a lightning fast reverse
reaction that throws the guide bar up and
in the direction of the operator. Can cause
serious injury.
yyyywwxxxx The rating plate shows se-
rial number. yyyy is the
production year and ww is
the production week.
Note:
Other symbols/decals on the product refer to
certification requirements for some markets.
2392 - 003 - 26.03.2024 3