Zenoah EBZ8560, Operator'S Manual, Page: 15 / 68

1. Loosen the fasteners that holds the air filter
cover in position.
2. Remove the air filter cover (A).
A
B
C
3. Remove the foam filter (B) and the paper filter
(C) from the filter frame.
4. Replace the paper filter (C).
5. Clean the foam filter (B) with warm soap water.
Note:
An air filter that is used for a long time
can not be fully cleaned. Replace the air filter
regularly and always replace a damaged air filter.
6. Make sure that the foam filter (B) is dry.
7. Clean the inner surface of the air filter cover (A)
with a brush.
To replace the harness
WARNING:
A damaged harness
can make the product fall and cause
injuries.
1. Stop the engine.
2. Remove the clamp from the strap.
3. Push the end of the strap through the hanger.
4. Pull the new strap through the hanger.
5. Attach the clamp to the new strap.
Transportation, storage and disposal
Transportation and storage
WARNING:
To prevent the risk of
fire, make sure that there are no leaks or
fumes during transportation or storage.
Make sure that there is no risk of sparks
or fire.
• Empty the fuel tank before transportation or long-
term storage. Push the air purge bulb to make
sure that all fuel is removed. Discard the fuel at
an applicable disposal location.
• Make sure that the product is clean and that a full
servicing is done before long-term storage.
• Remove the spark plug and put approximately 1–
2 ml of two-stroke oil into the cylinder. Pull the
starter rope handle slowly 3 times and install the
spark plug again.
• Attach the product safely to the vehicle during
transportation.
• Keep the product in a dry, cool and clean space
with good airflow. Keep the product away from
children.
2142 - 005 - 06.07.2023 15