ZoningBOX 6 / ZoningBOX 4
Technical Support:
6
To get detailed information about the technical features of this device, as well as
on the installation and security procedures, please refer to the corresponding
Datasheet
, bundled with the original device packaging and also available at
1.3
START-UP AND POWER LOSS
Depending on the configuration, some specific actions may be performed during the
device start-up. For example, the integrator can set whether the grilles should switch to
a particular state and whether the device should send certain objects to the bus after
the power recovery, as explained later in this document.
On the other hand, when a bus power failure takes place, ZoningBOX will interrupt any
pending actions, and will save its state so it can be recovered once the power supply is
restored.
