ZoningBOX 6 / ZoningBOX 4
Technical Support:
16
2.2.2
GRILLE CONTROL
This tab sets the opening states depending on control variable values.
ETS PARAMETERISATION
Figure 14
–
Grill Control
Intermediate Control Point 1
[
0…
35
…100%
]
:
sets a limit under which every
control order received with a value between 0% and
Intermediate Control
Point 1,
will implies an opening value of
Grille Position 1
[
0…
20
…100%
].
Intermediate Control Point 2
[
0…
75
…100%
]:
sets a limit so every order
received between
Intermediate Control Point 1
and
Intermediate Control
Point 2
will implies an opening value of
Grille Position
[
0…
50
…100%
].
Every order with a value above
Intermediate Control Point 2
will implies an
opening value of 100%.
Note
:
Improper values in the above parameters may cause undesired behaviours.
