Z41 Pro / Lite / COM
http://www.zennio.com
Tecnical Support:
http://support.zennio.com
89
Action
: sets the value to be sent on button touches. This can be
“Left 0, Right 1”
(by default) or
“Left 1, Right 0”.
Off Icon
and
On Icon
: dropdown lists for the selection of the icons that will
represent the two states (0 / 1) of the
[Pn][Bi] Binary Indicator
object, which
gets automatically updated whenever an order is sent through the control object.
It may also receive values from the bus.
3.6.2.3.2
Binary Control (Text)
Figure 79
Binary Control (Text)
When the user touches the buttons, a binary value will be sent through the
[Pn][Bi]
Binary Control
object, while the status object,
[Pn][Bi] Binary Indicator
, will determine
the text that will be shown in the box.
The parameters available are:
Action
: sets the value to be sent on button touches. This can be
“Left 0, Right 1”
(default) or
“Left 1, Right 0”.
Text Off
and
Text On
: indicative texts that will be shown in the box depending
on the state (0 / 1) of the
[Pn][Bi] Binary Indicator
object, which gets
automatically updated whenever an order is sent through the control object. It
may also receive values from the bus.
3.6.2.3.3
Enumerated Control (Icon)
The box will behave analogously to the case of the Binary control (Icon) however it will
be possible to distinguish up to 6 states (configurable through the
# Enums
parameter)
instead of only two. The states will be determined by the reception of any values between
