Z41 Pro / Lite / COM
http://www.zennio.com
Tecnical Support:
http://support.zennio.com
37
registered as attended. The GetFace IP does not manifest the call rejected, so
the call continues from the point of view of the visitor.
Accept Call
: opens the ongoing call dialog (see section 2.12.1.3 for details) and
the synchronisation object is sent to the bus to notify others Z41 COM linked to
the same GetFace IP. The call is registered as attended
Open Door
: sends the command to open the door through a communication
object or/and through a HTTP command (it is possible to enable secure opening
with username and password), as parameterised. Besides the synchronisation
object is sent to the bus to notify others Z41 COM linked to the same GetFace
IP. The call will continue but is saved in the log as attended. Up to three buttons
can be enabled to open up to three doors.
Note
:
It is possible to configure automatic door opening when receiving a call
(see section 3.3)
Exit
: the incoming call dialog is closed but no notification is sent to the bus, so
the call will continue in the others Z41 COM
.
Mute Call
: mutes the call ringtone and the synchronisation object is sent to the
bus to mute the others Z41 COM linked to the same GetFace IP.
2.12.1.3
ONGOING CALL
When accepting the call, the ongoing call dialog poops up, as shown in Figure 26:
Figure 26
Video Intercom. Established Call
