Z41 Pro / Lite / COM
http://www.zennio.com
Tecnical Support:
http://support.zennio.com
35
attended call since the last time the call log was accessed, the indicative icon appears
on the button to access the call log, as shows the following figure.
Figure 22
Video Intercom. Not attended call.
If several Z41 COM are associated to the same GetFace IP, it is required a
synchronization between them to prevent inconsistent data in the call log. This
synchronization is carried out by notifying the actions performed in a Z41 COM via
communication object. When another Z41 COM receives, through the mentioned object,
a call has been accepted or rejected from another device, a message will be displayed
for a short time (see Figure 23). These messages can be changed by parameter (see
section 3.2.2)
Figure 23
Video Intercom. Synchronisation messages
2.12.1.1.2
Viewing images from the camera
When a Video Intercom is parameterised as
private
, another button is available to
access to the camera visualization page. In this page it is possible to open the doors.
(see Figure 24).
Note
:
if the IP of the external unit has been assigned by DHCP, not static (see the
GetFace IP user manual available on the Zennio website), the preview of the camera
image will not be accessible until at least one incoming call has been received.
