Z41 Pro / Lite / COM
http://www.zennio.com
Tecnical Support:
http://support.zennio.com
25
Note
:
if “Do Not Disturb” mode is enabled during a call, the call will go on normally
and the "Do Not Disturb" mode will be activated when the call finishes.
“Do Not Disturb” Mode: Timing
: Countdown to disable do not disturb mode. If
set to 0 this mode will be active indefinitely.
When enabling the mode, the value ‘1’ is sent through the object “
[VoIP
] “Do Not
Disturb” Mode
” and when the timing expires it is sent the value ‘0’. It is also
possible to stop the countdown by manually disabling the mode (or through the
communication object).
IP Address
: IP address to be indicated on the outdoor video intercom unit or on
another indoor unit to establish communication. It is set by parameter (see
section 3.2.13).
Gateway
: Gateway of the outdoor or indoor unit, set by parameter (see section
3.2.13).
